Thursday, January 8, 2015

A Bookbinding Glossary... condensed for dabbling

I figured that it was a good idea to list-off some paper and bookbinding terms, as this seems to be one of my favorite subjects for projects/procrastination.




The 'glossary' below is the term list that I would give to my bookbinding students to bind up in a pamphlet as their first project and to keep as a resource.  It is by no means exhaustive, but it is a good starting point.  These terms are geared towards the projects that they were doing, which offers some explanation for the eccentric smattering of themes.

It is in alphabetic order (seemed like a reasonable idea at the time) and I have thrown in a picture or two of past binding projects, just to break up the monotony.  There are links for more in-depth reading, instructions, and supplies at the bottom... in case some insatiable passion for book-craftery has been awakened.


Hope it is helpful:

Accordion book: any form of book that incorporates an accordion fold in its interior construction.

Artist book: a book that has been designed and constructed to demonstrate the skill and unique vision of the bookmaker using noncommercial materials and methods.

Awl: also known as a pin tool or a probe and it can come in a variety of sizes.  This is used for making the sewing holes in the paper and other materials.

Barrel stitch: a type of running stitch used without tapes or chords that is used to bind up the text block.

Board sheers: a paper cutter that can come in a wide variety of shapes and sizes that is made up of a flat cutting table and a blade that is pulled down and pivoted on a hinge.  This is generally used for thicker things, like book board, but only one sheet at a time.

Bone folder:  a carved bone stick that can come in a variety of shapes and sizes used to aid in folding, burnishing, and smoothing.

Book cloth: any type of cloth traditionally used in cover construction.  The cloth is either backed with paper or starch which keeps the glue or paste from seeping through to the finished side.




Book board: the modern material used for covers and boxes to house text blocks and books.  It can come in many thicknesses and it is made of many layers of paper.  Book board is currently made of paper but it used to be made of pulped rope and the earliest book ‘board’ was wooden panels.

Brass folder: like the bone folder, but made of brass.  It is only for use with leather or tougher materials.  Not for paper use since it is more likely to leave marks.

Chain Lines: (see Handmade paper and Laid Lines) paper can be made in a frame by hand.  A mesh that catches the paper fiber is supported by chains.  These chains tend to run against the grain direction in the paper and run along the shortest dimension of the paper sheet.

Chord: a thin twisted rope made from plant fiber which the text block is sewn onto.

Codex: 1st century AD Romans developed the first Western books (not scrolls) with pages and boards.  These books used heavy wooden boards as covers and these books were called ‘codices’ after the Latin for ‘trunks of trees’.

Colophon: the written information concerning authorship and construction in an artist book.  This information includes the maker, the press, the date, the construction materials, the fonts used, edition number, a dedication, and any other relevant information.

Coptic stitch: a method of sewing the text block together developed by the Copts.  The Coptic stitch is generally used for exposed bindings.

Deckle: is the frame that handmade paper is made on. The feathered, thin edge of handmade papers occurs because of the deckle and so it is called a deckle edge (often deckle for short).  This edge can also be artificially made by tearing and distressing the edge of a piece of paper.

End sheets: the spreads at the end and beginning of the book comprising the fly leaves and paste downs.




Exposed bind: is a binding where the spine is not covered by cloth, leather, or some other material.  Instead the stitching that holds the text block together and the back of the text block are visible.

Fly leaf: is both the first and last page in a book.  It is generally a decorative paper and it is used to protect the pages in the text block.

French fold: a binding method where the folded spreads that make up the text block are not held together by stitching or glue in the spine, but rather they are glued together, two spreads at a time at the front edge at the book.

Full cloth: a binding where the cover is fully covered with cloth.

Full leather: a binding where the cover is fully covered with leather.

Grain: the direction that the fibers in a paper line up along.  A paper naturally tears and expands along this axis and so the grain of the paper should always be kept parallel to the spine.

Guillotine: a paper cutter where the blade comes down and cuts material on a flat bed.  Many papers and materials can be cut at once so a guillotine is an essential tool for straitening up edges after sewing the text block or gluing together a perfect bind.

Handmade paper: is any paper that is made in small batches, one sheet at a time on frames instead of in large batches of one continuous sheet in factories.  Even if the paper is machine made, it is still cut down to a size similar to a handmade sheet.  Traditionally, one sheet is called a ‘folio’ (and when it is folded down it is still a folio, but in folded form it is a signature). When the folio is folded once, this pamphlet is called a ‘quarto’ because there are four pages that are created.  When the folio is folded twice it is called an ‘octavo’ and when it is folded three times it is called a ‘sixteen-mo’.  Occasionally, paper will be made much larger than the normal size range and then folded down; in these instances there are a wide variety of names, such as ‘elephant’ or ‘emperor’ folios.




Headband: a protective and decorative chord or band at the top of the text block at the spine of the book.  A headband can be made by wrapping silk thread around a chord and sewing it into the top of the text block, or it can be added as a pre-made tape, cut down to size, and glued down on the text block.

Hollow: the flattened paper tube that is glued in the spine, in-between the text block and the cover.  The hollow allows a book to open flat with both covers resting on a flat surface.  It also reduces stress on the book while it is open, so it adds to the life of a binding.

Laid lines: the ridges and valleys running horizontally across a sheet of handmade paper that has been made in a chain-supported frame (see Chain lines).

Leaf: the back and front of a single page in a book.

Leather: the tanned skin of an animal used as a cover material.  The most common leathers used are calf, pig, and goat.  Before a leather hide can be used in book binding in needs to be pared down, which is essentially scraping of the back fibers of the leather to make it thinner and easier to bind with.

Medieval bind: codices with panel covers, pages of vellum, sown onto chords that are then laced into the covers, with metal clasps and locks to keep the book together, and the spine is flat on books prior to the 15th century and afterwards they took on a rounded shape.




Modern bind: books with paper pages, book board covers, and sown onto tapes.  There are some variations in the form but all of these elements are normally in a contemporary hardcover binding.

Mull: also called ‘Super’ or ‘Tartan’, this is a fine mesh fabric made from cotton or linen used to reinforce and strengthen the spine.  Mull is sometimes used as a replacement for sewing onto tapes.  Still, the strongest binding uses both tapes and mull.

Needle: like a normal sewing needle, but thicker and with a smaller eye proportional to size than a quilting needle.

Pamphlet: a simple sown binding that generally incorporates one folio and a cover paper.

Paper weight: measured in several different ways.  More commercial papers will give you poundage, which is telling you the weight of the parent sheet of paper.  Unfortunately, there is no standardization in parent sheet size across the industry, so this measurement is generally meaningless.  Commercial paper is also called either ‘text’ or ‘cover,’ ‘text’ always being the lighter weight and ‘cover’ always being the heavier.  Paper can also be measured in ‘GSM’ which stands for grams per square meter.  This is the only accurate was to measure and compare paper weights but only more expensive and high quality paper is marketed with this information.

Parent sheet: the larger sheet of paper that smaller sheets are cut down from before they are sold commercially.

Paste down: the recto side of the fly leaf spread which is glued down onto the cover.

Perfect bind: a binding of a single stack of loose sheets that is glued at the spine and has a soft cover.  This is most commonly seen as a trade paperback.

Post binding: a stack of single sheets held together between boards by metal, removable posts.

Post hole puncher: a mechanical puncher used to make clean holes in thick materials (like book board) for post binding or stab binding.

PVA glue: poly vinyl acetate.  The glue used in bookbinding because it is archival (meaning non acidic and not going to become acidic over time), dries clear, flexible, water soluble before drying, and heat activated after drying.




Quarter cloth: a binding where the cover is a quarter covered by cloth.  The cloth will extend a quarter of the front cover, go around the spine, and then extend a quarter of the back cover.  The rest of the cover will generally be covered with paper.

Quarter leather: a binding where the cover is a quarter covered by leather.  The leather will extend a quarter of the front cover, go around the spine, and then extend a quarter of the back cover.  The rest of the cover will be either paper or cloth.

Recto: the right facing leaf in a spread.

Scorer: a tool made of bone similar to a bone folder but slimmer; it comes to a sharper point, it is normally curved, and it is used for scoring papers to make folding easier.

Signature: or ‘gathering’ is a folded down folio which is then ready for sewn binding.

Sizing: a substance added to paper (a starch or glue) while it is being made that makes it stiffer and gives the paper a finer surface for drawing and printmaking.  Unfortunately, sizing discolors with age and in the sunlight but it can be washed out.  Sizing is normally washed out of paper before it is used for watercolor since it will make the paper warp irregularly with uneven water applications.

Spatula: a metal tool that comes in a variety of shapes and sizes used for lifting, separating, and tearing.

Spine: the back of the book which is a hinge for the covers and pages.




Spread: the two pages that you are looking at when you open up a book at any given time.

Stab binding: an exposed binding synonymous with Eastern binding where thread is elaborately and decoratively sewn through the covers and through the papers that makes up the text block as a stack.

Tape: a woven linen strip that signatures are sown onto.

Tear down: instead of cutting the paper with a blade, it is manually torn down using a ridged surface, like a ruler, as a guide.

Text block: essentially everything that goes in-between the covers.

Thread: made from linen, comes in a variety of colors and thicknesses, and it can come either waxed or un-waxed.

Tip in: to glue in a single sheet into the text block after the text block had been previously completed by sewing or gluing.

Vellum: tanned, thin, calf skin used for the covers of books (called a soft calf binding).  Vellum can also be referring to any type of tanned animal skin and when it is used as the pages in books it is often called parchment.  Because the surface of vellum is so fine and smooth, paper is often marketed as having a ‘vellum’ finish.

Verso: the left facing leaf in a spread.

Wax: beeswax is used to coat thread so that it holds knots better and protects the tread fibers in an exposed binding.  A microcrystalline wax is applied and buffed into cloth, leather, and paper to protect and seal it on covers or any surface that experiences heavy wear.

Weaver’s knot: also known as a slip knot, this is the knot used to join on segments of thread.

Wheat paste: an adhesive made by cooking wheat starch in water until it becomes a thin paste.  It is then strained and thinned with water.  Due to its perishable nature, it should be used quickly and an anti-fungal agent, such as Thymol, is incorporated into the paste during cooking.



So, how about that insatiable passion for all things book, paper, and their crafting and upkeep?



More terms and fantastic information:

Good place to buy supplies:


Wednesday, January 7, 2015

Making French Fold Books

Bookbinding sounds much more intimidating than it really is, especially considering how loose the definitions of 'book' and 'binding' are individually, more so when combined.



One of the easiest books to make is the French Fold.  There is no sewing necessary, it can even be done with tape instead of messing with glue and dry-times, and you can easily incorporate mixed media.  'French Fold' is in reference to the pages of the book being joined together on the outward facing fore-edges, instead of the interior edges/folds at the spine.



This is an instructional hand-out that I made for students (details below):


These instructions are for making a book from standard typing paper (8.5x11 in.), which has been folded horizontally.  I am violating one of the first rules of paper crafting here because I am literally going against the grain, paper grain that is, in my folds.  If I were doing this properly, the fold should be running vertically on the full sheets of paper.  The reasoning for this fold orientation is that it makes the spine of the book parallel to the grain direction in the paper (the normal grain direction for typing paper).  The rule of thumb is: the grain direction in paper (or material with a grain) needs to run parallel to the spine of the book.  This will allow the book to expand and contract according to varied moisture levels, both internal and environmental, without warping the book.  However, this project was for school children and the sizing above was more useful for the journals that they were making.  Their moms will love it no matter how many archival laws are being broken.

I am going to follow along with the instructions to make my own French Fold book, but I am going to make it smaller.  I am cutting my typing paper in half horizontally (so, maintaining the correct grain orientation) because I desired a smaller book.  Also, I am using double-sided tape to adhere my pages in lieu of glue (lazy, very lazy).



1. paper for your interior pages
2. paper or material for your cover
3. adhesive: double-sided tape or glue
4. straight-edge blade
5. self-healing mat
6. bone folder (to make crisp folds)
7. ruler (assist you in making straight cuts)
8. pencil (possibly, if you are inclined not to eyeball fold positions)









Step 1:


Or.... fold whatever paper you are using.  I would also use this time to cut the paper/material for the cover.  Your cover needs to have the same height (top to bottom of a page) as your page but you do not know how long your cover paper has to be until you measure the thickness of your text block (stack of folded and adhered pages).  Best to hold off a few more steps before you make that cut.



I had pre-cut the cover paper for the school students making these books, so they did not have to worry about that detail.  I have learned not to bank on children cutting straight lines.  In fact, just limit any critical scissor use.


Step 2:



I used double-sided tape.



If you accordion-out your stack, once it is adhered, it looks like this:





Step 3:


Now you can cut the length of your cover paper.  The length should be the width (side to side) of your pages, multiplied by 2 (you have a front and a back cover) add the thickness of the spine, and then add on an inch or two for good measure... in case of accidents.



Step 4:


Now, for me, I am just taping my text block to one outer edge of the cover paper and then making my folds.  Again, this is a lazy choice.  

Here is the taping of the first edge to the cover (easier if you put the tape on the cover and move the text block onto it):



The position of the first fold of the spine


Gratuitous close-up


Make the second fold to enclose the spine.  Then, I am taping down the other outer edge of the cover paper to the text block before trimming off the extra cover paper.  This is easier than the method in the hand-out, but it was not a practical option for the kids, as you really should do the trimming with a straight-edge and that seemed like a "'tis but a flesh wound" moment in the making.


Ready for the trim





Step 5 (if you weren't avoiding the giving of knives to children or being lazy):



Again, there was the other method of adhering the text block to the cover.



Now, why would you want to use French Fold?  More projects with that to follow.


Tuesday, January 6, 2015

From Pattern to Pieces: Find the Starting Point

Alrighty, there was the pattern, then the break for snacking, misusing philosophy, and now pieces are slowly knitting crocheting together.  Bummer on 'knitting' being an actual activity, est-ce pas?

Also, tailoring and sculpting terms will be used interchangeably in this post.  I am very sorry to be mixing the two, but if one genera more accurately describes the motions or the end-goal, then that was the default.  'Accurate and Obscuring' should be made as a labeling sticker.  Onward!

Pattern:



Starting to form:



How does one pick a starting point?

Well, that is a great question.  I have had some trial and error over the years and many a project on which I am banking that 'it is the thought that counts' and 'my Mom will love it and love me, no matter what.'  Confessions aside, just look at any form and start by separating out the appendages from the trunk.



On the fish, the body/sausage is the trunk and the fins are appendages.  Appendages are joined onto the trunk, so decide what you want to make first.  I tend to make appendages first.  Basically, those all MUST be there and if I run out of yarn/materials, then there is no recourse (unless you are gifting this to a 3-year old who will still love a three-legged wombat).  That being said, if you suspect an impending material shortage as you work on the trunk, then the wombat is more stubby and the 3-year old thinks it is more cute.  We all go home happy.

As you work on appendages, start working on the end point, or what is the solid, plane of yarn, farthest from the joining (the seam) of the appendage to the trunk.  Consider Hemingway's eye:


Facing outward


The backside

It will join (the seam) at the start of the socket and the solid face, farthest away from this, is the cornea covering the pupil.  So, working circularly, start at the pupil, work out to the iris, and finally add on the surrounding, orbital flesh.   If that don't church up acrylic yarn...

Still, this does not help categorize the body segment to be deemed 'the head,' further complicated with a mouth cavity, possibly nostril holes.  Think of the entire form/animal/shirt/whatever as a misshapen ball (a sausage is a rolled-out ball, right?).  This ball has to have a start and an end.  Assign both positions to the mushed ball which is your trunk.  The head may as well be your 'start' end.  But maybe I am just an optimist.



Actually, the mouth is the true start, as it is where, from the perspective of form, the top of the ball, as the head, dimples in on itself and becomes an internal projection.  I guess this is a mobius strip for an intestinal tract connecting to dermal covering.... but I wasn't planning on being that accurate.  So, my mouth has an end/back-wall before things get too grotesque.

Starting point identified: mouth.  Then finish the head and move on back through the trunk.



I am not going to do appendages (fins) first on Hemingway because the Coelacanth has lobed fins.  These lobes make the fins big, meaty parts of the body.  It would look funny if they were clearly attached, as opposed to limbs that seem to ooze out in fleshy protuberances.

I have another fish, a river trout, that I am working on for an art installation.  This has a simpler construction.  It is farther along, but the piecing and seams are simple and clear.  More on that coming...


Sunday, January 4, 2015

Nietzsche Meatzsche

"He who fights with monsters 
                    should look to it that he himself does not
                                                                
                                                                  become a monster...



                                            And when you gaze long into an abyss

                                                                                                       the abyss also gazes into you."



I am pretty sure that this is EXACTLY what Nietzsche was visualizing.
And chewing.  Okay, all done with the snacking and now it is back to crocheting.

Saturday, January 3, 2015

Still thinking about the fish-sausage metaphors...

... the pig in a blanket bit, to be more specific, at the end.

So, what did I do with my day off from work?

1.  Find a sausage and make some pastry dough (see recipe below).



See, I said the head was just a draped triangle while describing pattern-making.  Not just my normal delusional ramblings...



2.  Finish draping the sausage and make the necessary upgrades.



Try not to get too attached.  You will be exposing your new friend to high heat, dispatching with a sharp instrument, then supping on the meaty-goodness.  Most likely with ketchup.

3. Brush with egg wash and decorate.



I think his name is Edgar and he is a Chinook Salmon.  Not that accuracy or standards will have a dramatic impact on the finished product, mind you.  Anywho, I am using paprika (red), matcha (green), turmeric (yellow), salt (pink), and nigella (black) for my pigments.

4. Bake, remove, and greet Edgar.



Hello there, Edgar.

5.  Sorry, Edgar.



This is just awkward now.



Multi-Purpose Pastry...

In all fairness, this is a crime against pie crust, biscuits, and puff pastry, but you wind up with a very forgiving dough.  As in, it will hold up to reheating, sculpting, and oozing fillings, while still possessing a good flake.

I am giving volumes and not weights because I am too lazy to use a scale.



Sift into a bowl (or dump it in and stir with a nonjudgmental fork):

2.5 cups of unbleached flour
0.25 cups of white sugar
0.5 tbs baking powder
2 tsp kosher salt

For later: 1 stick of chilled butter and cold water 



Here's later:  Gently work into the dry ingredients 0.5 cups (1 stick) of chilled, unsalted butter, pre-cut into 1.5 in. cubes.  Do this very gingerly with just your finger-tips.  Once the butter inclusions look to be the size of peas, either in the round or that same volume transformed to a crushed flake, stop touching.

Add in just enough cold water to get the dough to come together.  The amount of water will change depending on the day's weather and the freshness of your flour, so be prepared for anything.  Generally, it is about 0.75 cups.

Make a 'brick' of the dough, approximately 5x8 in., on a sheet of plastic wrap.  Wrap up your brick and chill for half an hour.

On a floured surface, roll out your dough to 0.25 in. thickness.  Fold inward in thirds, one direction, then in the other (so right to left, then up and down).  Basically, 4 folds total.  Or whatever.  The folds give you flaked layers, so fold as you like.  Re-wrap and chuck brick back into the fridge to chill for another half hour.

Do this folding and chilling procedure two more times.

Pre-heat your oven to 375 F., with a rack in the middle.  Get an egg wash ready (half egg, half water) and any other items to tart up your dough.

Roll out your dough to 0.25 in. thickness and use it as you like.  Bake until golden.

Friday, January 2, 2015

Textile Sculpture, aka: pattern-making

'Textile Sculpture' is pretentious enough to give me a small eye tick, but 'pattern-making' does not seem to describe the activity or required skill.  You literally make a pattern by lining up candy according to color and deliciousness.   This hardly seems on par or relevant to converting two-dimensional shapes into a three-dimensional object.  Just think of the lavish Halloween costumes your Mom produced for you as a kid (or you phoned-in over the years... impromptu lumberjacks do not count here).




I enjoy patterns.  They are like recipe books for form and, like a recipe, they must deliver on function with bonus points awarded for materials and aesthetics... so, taste, truly.

Depending on the project, the complexity and detail in planning a pattern will vary dramatically.  I am currently working on Hemingway the Coelacanth's head, so I guess this will be the instructional launch point.

Here it is, my pattern, in all its informational glory (sorry):



Now, let me explain what I see when I look at this.  I am looking for planes.  Being an organic form, and stuffed/squishy to boot, almost all of these planes are parabolic.  We are entering into conic section territory so I will keep most of my descriptions to metaphors with sausage or other winsome visual cues.  Okay, so, do you see how the fish is a sausage with some upgraded attachments?




Fantastic and horrifying.  But now you know my deep, dark secret: how can any form be reduced to a tube?  Or something tasty?

But there is a problem because Hemingway's head is the terminating cap of the tube.  Worse yet, there is an inversion for a mouth.  So, now there are edges and points.  This is your visual clue to start looking for shapes with edges/points (polygons) at the end of the hotdog/fish.  As lazy is the wisest starting point, look for the easy polygons, like triangles.  Yes, these triangles will be wrapped/draped, but...tube-food, people.  It is a little tougher to see the triangles in Hemingway's head because of the distinct surface paneling on the species.  So let's imagine he is something more generic:







Better?  Okay, back to Hemingway.  Now, to overcome his reluctance to embrace the triangle, some wonky rectangles/trapezoids/parallelograms will join the party.  All fixed, sans the eyes and mouth (stay on target, Gold Leader).




Now, I have sliced up this poor head into all these small shapes because the textile is constructed in linked stitches (crochet) as opposed to piecing a woven fabric (sewing).  The advantage for knitwear is the ease of expanding and contracting forms: no gussets, pleating, or tailored seaming.  Instead, you add or eliminate stitches to encapsulate space.  Just think about a pig in a blanket.

So, this is the beginning with much more to follow.  Joints and attaching the planes together will be up next.